3 2T Heavy Vehicle Fleet Stacking Lift with Extended 164-Inch Platform

When managing a commercial fleet of long-wheelbase vehicles—such as transit delivery vans, extended passenger shuttles, and heavy-duty utility trucks—standard parking lifts present a severe operational hazard. Short platforms force the rear tires of these massive vehicles to hang precariously off the edge of the steel ramps, causing severe tire degradation and creating a massive balance risk. The 3.2T Heavy Vehicle Fleet Stacking Lift with Extended 164-Inch Platform was specifically engineered to eradicate this danger. By providing a sprawling 4166mm long car board, this lift ensures that the entire footprint of your longest fleet vehicles is fully and safely supported. This full-contact approach perfectly balances the heavy payload over the lift's center of gravity, ensuring a smooth, stress-free ascent.

In addition to its exceptional length, this platform is incredibly wide. Measuring 2300mm (90 9/16″) across, the car board provides a massive target for hurried fleet drivers finishing a long shift, entirely eliminating the risk of pinching tire sidewalls or curbing expensive commercial wheels against the steel superstructure. To further assist the rapid loading sequence, the platform is equipped with integrated rear wheel car fenders. As the driver navigates the long vehicle onto the lift, these fenders act as an unmistakable tactile stop, providing instant physical feedback that the heavy asset is perfectly centered and ready for safe elevation.

This extended footprint supports an absolute powerhouse of a lifting mechanism. Rated for a staggering 3.2 tons (7000 lbs), this stacker easily powers through the heavy demands of fully loaded commercial transit vans and battery-dense electric vehicles. The heavy-duty steel columns are validated by grueling 150% static load factory testing. Absolute safety is enforced by a state-of-the-art photoelectric switch that monitors the lift path, immediately interrupting the power circuit if the heavy load is unbalanced. Once the carriage hits its 2100mm maximum height, massive gravity-fed mechanical anti-fall locks automatically deploy, completely neutralizing the risk of a hydraulic drop.

Core Product Advantages:

Full-Support Extended Platform: The massive 4166mm (164-inch) long platform perfectly supports long-wheelbase transit vans and extended trucks, preventing dangerous tire overhang.

Massive Fleet Capacity: Safely hoists 3200kg (7000 lbs), making it perfectly suited for the heavy luxury electric vehicles, commercial vans, and full-size trucks.

Rim-Protecting Wide Base: The sprawling 2300mm wide loading plate provides an incredibly forgiving target, completely eliminating the risk of scratching expensive commercial wheels.

Tactile Loading Fenders: Rear wheel stops provide physical feedback to the driver, ensuring perfect vehicle placement on the extended platform before the lifting cycle begins.

Impenetrable Mechanical Safety: Gravity-fed mechanical anti-fall mechanisms provide an absolute physical failsafe against unexpected hydraulic pressure loss.

Active Photoelectric Protection: Smart electronic sensors prevent side rollovers by halting the lift cycle the moment an unbalanced or unsafe load is detected.

Leak-Mitigating Inverted Hydraulics: The upside-down cylinder orientation naturally repels lot dust and grit from the critical seals, drastically reducing service intervals.

Product Technical Specifications:

Model No.: ON-7232P

Lifting Capacity: 3200kg (7000lbs)

Lifting Time: ≤55s

Descent Time: ≤35s

Lifting Height: 2100mm (82 11/16″)

Car Board Width: 2300mm (90 9/16″)

Car Board Length: 4166mm (164″)

Total Width: 2766mm (101″)

Bottom Plate Length: 3165mm

Gross Weight: 1162kg (2,562LBS)