Eounice ON-7215DT Two Post Car Lift 5 5 Ton Direct Drive Clear Floor

The Eounice 5.5 Ton Two Post Lift Direct Drive Manual Release Clear Floor 1900mm Height is a heavy-duty 5500kg (12000 lbs) lift built for efficient undercar service. Its direct-drive hydraulic system avoids chain break or derailment risks, supporting reliable daily shop operation. The clear floor layout keeps the bay open for equipment movement, while 1900mm lifting height provides practical standing clearance for many repairs. With 2730mm drive-through width, four three-stage arms, and 95mm low-profile pads, it adapts to many chassis designs and vehicle types. Manual release simplifies technician routines, and the upside-down cylinder installation supports easier maintenance.
  • Detail
  • Parameters

 

  • Eounice ON-7215DT two post car lift, 5.5 ton direct drive lift, clear floor two post lift, 5500kg vehicle hoist, 12000 lbs heavy duty car lift, no chain hydraulic lift, professional garage lift, commercial workshop hoist, fleet maintenance lift, truck SUV two post lift, 2730mm drive through width, 1900mm lifting height, 95mm low profile pads, 2.2kw motor, three stage lifting arms, reinforced locking arms, one side manual release, upside down cylinder maintenance
  • The Eounice ON-7215DT Two Post Car Lift 5.5 Ton Direct Drive Clear Floor is engineered for workshops that need a dependable, high-capacity lift with an open, efficient service bay. With a 5500kg (12000 lbs) rating, it is designed to handle a wide range of vehicles, including many SUVs and light trucks, while maintaining the stability and control professional technicians expect. Eounice uses a direct-drive hydraulic cylinder system to reduce chain-driven vulnerabilities, helping avoid common issues like chain stretch, derailment, or breakage. This design supports smoother daily operation and can reduce chain-specific inspection and maintenance concerns, keeping bays productive.

    • Clear floor layout is one of the most valuable real-world advantages. By keeping the floor open between the columns, technicians can roll transmission jacks, tall oil drains, and tool carts under the vehicle without obstruction. That mobility saves time across common services such as exhaust replacement, driveline repair, suspension work, and inspections. The 2730mm drive-through width supports easier positioning for wider vehicles, and the 1900mm lifting height provides practical undercar working clearance for many repair tasks. With overall geometry suitable for higher-roof vehicles, the lift helps mixed-use shops serve a broader customer base without needing specialized equipment in a separate bay.

    Vehicle adaptability is improved with four three-stage lifting arms that extend to match varied wheelbases and lift-point patterns. This helps technicians achieve correct lifting-point contact more easily across different chassis designs, improving safety and reducing setup time. Reinforced locking arm structure helps keep arms secure under load, supporting repeatable workflows. Screw-up rubber pads provide fine adjustment and maintain a low 95mm minimum pickup height, making the lift practical even when lower-clearance vehicles are part of the service mix.

    Operational simplicity is supported by the one-side manual release, which helps standardize daily habits and can reduce training time for new technicians. Long-term serviceability is also considered: the upside-down installed hydraulic cylinder layout is intended to make later maintenance more convenient, reducing downtime during service intervals. Powered by a 2.2kW motor, the lift performs with a lifting time up to 55 seconds, supporting professional bay turnover while keeping lifting controlled.

    For auto repair shops, commercial workshops, and fleet service facilities that need a strong clear-floor lift with direct-drive reliability, the Eounice ON-7215DT provides capacity, access, and usability in one proven package. Optional accessories like foot guards and extension adapters help tailor the lift to your shop’s safety preferences and the vehicle types you service most.

     

    Direct-drive hydraulic design helps reduce chain-related risks and downtime.

     

     

    Clear floor bay improves mobility for undercar equipment and tool carts.

     

     

    High capacity 5500kg (12000 lbs) supports heavier daily service.

     

     

    Wide drive-through 2730mm supports easier vehicle positioning.

     

     

    Four three-stage arms improve chassis compatibility and faster setup.

     

     

    Low pickup height 95mm helps with lower-clearance vehicles.

     

     

    Reinforced locking arms support stable, safer lifting under load.

     

     

    Service-friendly cylinder orientation supports easier long-term maintenance.

     

     

    2.2kW motor performance supports consistent commercial operation.

     

     

    Up to 55-second lift time supports efficient bay turnover.

     

     

    Model No.: ON-7215DT/5.5

     

     

    Lifting capacity: 5500kg (12000 lbs)

     

     

    Lifting time: <55

     

     

    Lifting height: 1900mm (74 13/16")

     

     

    Minimum height: 95mm (3 3/4")

     

     

    Overall height: 4224mm (166 5/16")

     

     

    Width between columns: 3000mm (118 1/8")

     

     

    Overall width: 3570mm (140 9/16")

     

     

    Drive-through width: 2730mm

     

     

    Motor power: 2.2kW

     

     

    Gross weight: 870kg (1,918 lbs)

     

     

    Standard arms: 4 three-stage lifting arms

     

     

    Release type: one side manual release

     

     

    Drive type: hydraulic cylinder direct drive, no chain

     

     

    Cylinder installation: upside down installed

     

     

    Optional items: foot guard, extension adapters

     

  • The Eounice ON-7215DT Two Post Car Lift 5.5 Ton Direct Drive Clear Floor delivers 5500kg (12000 lbs) lifting capacity in a clear-floor layout that keeps service bays open and efficient. Its direct-drive hydraulic system avoids chain break or derailment risks, supporting dependable daily operation in commercial workshops. With a wide 2730mm drive-through width, 1900mm lifting height, four three-stage arms, and low 95mm pads, it adapts to many chassis designs and vehicle types, including SUVs and light trucks. One-side manual release simplifies technician routines, and the upside-down cylinder installation supports easier long-term maintenance.

    • Model number
    ON-7215DT/5.5
    Type
    CLEAR FLOOR TWO POST LIFT - DIRECT DRIVE ONE SIDE MANUAL RELEASE
    Main lifting height
    1900mm(74 13/16")
    Lifting capacity
    5500kg(12000lbs)
    Main lifting time
    <55s
    Brand
    EOUNICE
    Minimum height
    95mm(33/4")
    Overal height
    4224mm(166 5/16")
    Distance between columns
    3000mm(118 1/8")
    Overal width
    3570mm(140 9/16")
    Engine power
    2.2kw
    Gross weight
    870kg(1918LBS)
    Home
    Customer service
    WhatsApp
    Price quotation